Kingcera’s wear-resistant ceramic sheet is a kind of high wear-resistant material, the main material is aluminum oxide. Wear-resistant ceramic sheet has an excellent resistance to high temperatures, abrasives and chemicals with low thermal conductivity,high hardness, corrosion resistance,which can be used in a variety of high wear or corrosion environment.
However, wear-resistant ceramic sheets also have disadvantage, such as fragile, can not touch with hard objects such as metal bars, otherwise it will damage the ceramic sheet. With this issue we need to be pay attention to installation and using .
Kingcera’s wear-resistant ceramic sheet installation method is simple. Use ceramic glue, epoxy resin glue. Before installation, wipe the dust and oil stains on the surface of the device, stir the glue A and B according to the proportion, and stir until the color is the same. If abnormal phenomena such as obvious clumps, particles, and dryness occur, it indicates that the glue may be damp and caked, and you need to replace the glue. Apply the mixed glue on the surface of the ceramic, and then paste it on the equipment, check the smooth condition of the ceramic in time after pasting, and adjust it. After the glue is completely cured (about 24 hours), gently tap the tile with a small rubber hammer. If there is no empty drum sound, the installation is complete.
Kingcera has a very strong and experienced R&D team to promise the good quality of our ceramic sheet,which was widely used in a variety of high wear or corrosion environments, to improve the performance and service life of mechanical equipment. Such as port, chemical industry, power plant, steel, mining and other industries.
